PV Panels 6
Each panel has its own inverter (so if a panel or an inverter fail, the rest of the system still keeps working). These are all connected via cables and plugs. It is a 3 phase ....
Author: gjj
PV Panels 5
Car park panel supports fitted. Took time to saw some of the old beams from the upper mezzanine for future firewood. All stored behind the fence to keep the garden clear.
Workshop 2
With the frame in place, I have covered it with a breathable membrane. I t gives a good impression of the final space. On the car park roof the positioning of the supports for the ....
PV Panels 4
With both sides doe I can finally fit the rear trim to the roof. It has to be trimmed as the rear and side trims clash at the corners. So, on to the Car Park ....
PV Panels 3
Both sides of the roof are now extended and recovered. Rear of the house from the fence line.
Workshop 1
Finished off the timber framing of the workshop including the second window opening. Both verticals and horizontals for the eventual cladding. extending the sides of the roof for the PV panels. In between other work ....
PV Panels 2
Now that the doors and windows are in, birds that get in via the roof cannot get out through the openings. I keep finding them near the doors where they have literally knocked themselves senseless. ....
PV Panels 1
A break in the weather so I have started to install the support system for the panels and inverters on the car park and BBQ/Workshop roofs.
Upper Mezzanine Floor 6
Time to move inside and make a start on the floor for the office on the upper mezzanine. First I had to finish securing the oak strengthening beams using the M12 threaded bar. Outside I ....
Barbecue Guttering 2
Today I decided to finish off the guttering to divert the water away from the wall and front of the BBQ. I still need to install a set of down pipes but they are less ....