Kerbstones 2
While the guys have been installing the kerbstones by the car park and around the house, I have got on with installing the first floor joists.
Views of the property from the outside
While the guys have been installing the kerbstones by the car park and around the house, I have got on with installing the first floor joists.
While the weather is still good, the kerbstones are laid to define the garden boundaries. Oops, this cables should have gone under the kerbs. The new garden gate and the holes for services through to ....
The concrete base has gone into the garden store. And the new replacement beam has been installed over the existing one that gave me concerns at one end. Also te high level beam is in ....
Day spent aligning panels and screwing them in place to secure them. Then drove around to the other side of the hameau to take a picture of the rear of the house from across the ....
With Phillipe helping again the morning was spent lifting the final roofing sheets in place together with the ridge. I then played with one of the side panels before getting bored. So in stead of ....
Back to the roof of the car park, I adjusted the rafters to align them properly then fixed the final battens. Then, with a lot of help from Phillipe across the road the large sections ....
Bought a drone to see how to use them and here are my somewhat sorry first attempt with a 720i camera.Poor as they are they do give an idea of the site perspective. External approach ....
Today I carefully measured and installed the rafters only to find when I tried to fit the first batten (from side to side) the rafters were not well aligned. So the end of the afternoon ....
Like a miracle, by ensuring the first post was vertical and held firmly in place, the entire construction went together without a hitch although you can see I had to do a lot more localised ....
Another day, another approach and more importantly I remembered to bring another few ratchet straps. After a lot of grunting and twisting, the bolts finally went in place and I was able to tighten the ....