PV Panels 10
Came in via the electrical shop having bought the bits need to get the cabling from the panels down to the underground cable that connects the BBQ/Workshop to the car park. Having read the manual, ....
PV Panels 9
I am not keen on moving the PV Panels yet again and despite chasing MG Habitat for a return to site date I have heard nothing back. So I have decided to install them on ....
Workshop Interior 2
Lots of site clearing in preparation for the tilers to return for the external slabs. Found time to finish the insulation of the corner of the workshop and clad it in OSB. emptied, dismantled and ....
Staircase 4, First Floor Flooring 13
Got on with fitting the bannister rails today. Mostly OK. The gap between the upper and lower starch is a safety issue so Need a better solution. Bit annoying as it took me ages to ....
Staircase 3
Sunday morning and I thought I would come over to put in the missing treads and start playing with the spacing of the bannister supports.
Staircase 2, First Floor Flooring 12
On with the staircase. VIPs (Wiz and Josie) coming Wednesday week so I need to give them some safe access to the first floor. Once the second stringer was in place I turned my attention ....
First Floor Flooring 12, Workshop Interior 1, Staircase 1
In order to continue with the flooring upstairs I have laid the second plywood sheet for the en-suite but still need some more to trim off the end which is at an odd angle. In ....
Workshop Corner Cladding
The corner of the workshop is now structurally complete and so I have wrapped the membrane over it from the outside. I then added the cladding support battens and starting at the far end, applied ....
Garden Clearance and First Floor Flooring 11
On my mission to clear the garden before Florent returns, I decided to move the doors I recovered from the fire damaged house. They have been leaning against the tree for over a year now. ....
Workshop Refit
The tiles and grouting are set so I have cleaned them down (many were still stained with fire damage and charcoal) and started to replace the items in the workshop. As you can see I ....