Final Floor Beams 2
The concrete base has gone into the garden store. And the new replacement beam has been installed over the existing one that gave me concerns at one end. Also te high level beam is in ....
Final Floor Beams 1
Florent's team returned to site today and immediately set about installing the missing floor beams that were recently delivered for both the first floor and attic . By the end of the day the attic ....
Car Park 12
Day spent aligning panels and screwing them in place to secure them. Then drove around to the other side of the hameau to take a picture of the rear of the house from across the ....
Car Park 11
With Phillipe helping again the morning was spent lifting the final roofing sheets in place together with the ridge. I then played with one of the side panels before getting bored. So in stead of ....
Car Park 10
Back to the roof of the car park, I adjusted the rafters to align them properly then fixed the final battens. Then, with a lot of help from Phillipe across the road the large sections ....
Weekend Flight
Bought a drone to see how to use them and here are my somewhat sorry first attempt with a 720i camera.Poor as they are they do give an idea of the site perspective. External approach ....
Car Park 9
Today I carefully measured and installed the rafters only to find when I tried to fit the first batten (from side to side) the rafters were not well aligned. So the end of the afternoon ....
Car Park 8
Like a miracle, by ensuring the first post was vertical and held firmly in place, the entire construction went together without a hitch although you can see I had to do a lot more localised ....
Car Park 7
Another day, another approach and more importantly I remembered to bring another few ratchet straps. After a lot of grunting and twisting, the bolts finally went in place and I was able to tighten the ....
Car Park 6
The fourth post and cross members go up. All seemed to fit well at this end including the bracing post. The other end was a different story. First the cross member was badly warped and ....